Lifting column system The lifting column equipment is mainly composed of two parts: lifting column body and pneumatic spring system. Lifting cylinder: The lifting cylinder is mainly composed of a lifting cylinder and a machine base. The whole machine is made of steel. It is made of 6mm thick seamless steel pipe and welded. It has high strength and impact resistance. Force; the outer wall is red alert color, equipped with a yellow reflective tape, and the built-in high-bright LED light can be turned on at night to warn the vehicle to pay attention to the risk. The device is buried in the car At the designated location on the road or gate, the vehicle is restricted by the instructions of the duty officer. Gas spring, The hydraulic movement is mainly composed of a high-pressure gas as the inner core of the gas spring, etc. It is the power source of the whole lifting column system. The device is installed inside the lifting column and is used with the lifting column.
Product advantages Quick and quiet: The fastest time to rise is 35 seconds, which is far greater than the lifting columns of other manufacturers of the same specifications. This is extremely valuable. Because it is hydraulically driven soft and calm. The structure is unique: the core part of the hydraulic unit and the mechanical power mechanism are integrated design, which can effectively transfer the mechanical energy to the hydraulic drive unit, the action is efficient, and the hydraulic unit achieves the pressure to rise. Design, excellent performance, is rare in the same field at home and abroad. Safe and reliable: It can be manually lowered and lifted freely. Economical problems: Because it is a hydraulic transmission integrated mode, environmental protection and energy saving, low consumption, lower failure rate, longer service life, lower maintenance costs, and non-traditional guide mechanism design Installation and maintenance is easier and faster.
Semi-automatic lifting cylinder technical parameters Material: Column: 304 stainless steel Flange: 304 stainless steel Flange thickness: 10mm Passing pressure: It can be used with container trucks of 80 tons or less. Pre-embedded barrel: A3 steel dusting Piston rod: QPQ salt bath nitriding treatment Cylinder head: QPQ salt bath nitriding treatment Piston rod diameter: 18mm Hydraulic cylinder housing: 304 stainless steel Hydraulic cylinder surface treatment: spray molding Rail material: chrome-plated 60 degrees hard Guide rail diameter: 20mm Reflective film: 3MDG third generation diamond grade full prism technology LED warning light: highlight, colorful, gradient